生活污水处理厂污泥处置技术研究

针对生活污水处理厂污泥处置技术,介绍了国内外污泥的处理现状,提出了传统的污泥处置技术,主要是海洋倾倒,污泥消化技术法,污泥堆肥技术法,污泥的土地利用和污泥的有效利用法,给出林地利用与绿化利用随着污泥量的增长,污泥的处置越来越来受到人们的关注。介绍了国内外污泥处理现状和传统污泥处理处置方法,分析了污泥稳定和资源化处置技术及应用进展,提出了污泥堆肥和堆肥后污泥的土地利用是符合中国国情的污泥处置与资源化利用途径。     

渭河流域关中段城镇污水处理厂污泥处理技术调查与分析研究

根据渭河流域关中段的污染状况及《(渭河流域水污染防治三年行动方案(2012-2014年)》对科技攻关的实际需求,采用资料搜集、实地调查、问卷发放、数理统计等方式对渭河流域关中段55座城镇污水处理厂的污泥处理情况进行了调查与分析。根据调查分析结果,提出了渭河流域关中段城镇污水处理厂污泥处理技术在应用过程中存在的一些问题,并结合该流域实际情况提出了相应建议,期望能够对该流域污泥处理技术的良性发展提供"第一手"的参考资料。     

某麦芽生产厂废水管理与处理实践研究

麦芽生产过程包括清选、浸麦、发芽、烘干以及除根等工序,废水主要来自于浸麦、发芽等工序。某麦芽生产厂根据麦芽过程用水和废水产生的特点,采用设备改进、加强工艺管理、用水管理、废水回用、提高员工技能等措施,通过源头削减和生产全过程控制,合理调节生产用水,降低生产用水量和废水产生量,麦芽生产水耗指标为2.4 m3水/吨麦芽。麦芽废水采用SBR工艺进行处理,出水水质满足排放标准要求。该麦芽企业废水管理和处理经验为同行业提供了较好的案例。     

糖蜜酒精厂环境保护验收清洁生产评价研究

糖蜜是糖厂榨糖后的副产品,含有可发酵性的糖45％∽52％,是直接用于发酵生产酒精的较好的原料.文章以广西某糖蜜酒精厂为例,在调查了解酒精厂生产工艺与装备、资源能源利用指标、污染物产生指标、废物回收利用率和环境管理要求等五个方面的基础上,认真细致分析环境保护竣工验收监测数据及生产报表数据,按照（HJ 581-2010）《清洁生产标准酒精制造业》（国家环境保护部）的要求对酒精厂清洁生产水平进行评价,并根据评价结果提出进一步提高清洁生产水平的建议和要求.     

城市污染河湖的综合整治技术及应用研究

分析了城市污染河流和湖泊污染的原因,将污染河流和湖泊治理的方法分为＂物理法、化学法、生物法、生态法＂共四大类,介绍了常用技术方法的原理和特点。根据河流和湖泊的污染现状和治理目标,提出了城市污染河湖的综合整治分为＂治理＂与＂生态修复＂两个阶段,探讨了采用＂截污、清淤、曝气、生物载体、水生植物＂等综合应用技术治理河湖的必要性和迫切性,并结合近年来国内河湖综合整治的典型案例,总结了河湖整治过程的＂基础措施＂和＂关键措施＂。     

Experimental study on agitated drying characteristics of sewage sludge under the effects of different additive age

Drying experiments of dewatered sewage sludge (DSS) were conducted on a agitated paddle dryer, and the effects of additive agents, i.e., CaO, pulverized coal (PC), heavy oil (HO), and dried sludge ("DS" through back mixing) on the agitated drying characteristics of DSS were investigated. The results indicated that CaO can significantly increase the drying rate of DSS. The drying rate at CaO/DSS (mass ratio) = 1/100 was 135% higher than that of CaO/DSS = 0. Pulverized coal has no obvious effect on drying rate, but the increase of PC/DSS can promote breaking up of sludge lump. Heavy oil was found to be slightly effective in improving the drying rate of DSS in the examined experimental range of HO/DSS = 0-1/20. It is also found thatHOcan reduce the torque of the dryer shaft, due to its lubrication effect. Back mixing of DS was found to be effective in alleviating the unfavorable effect of the lumpy phase by improving the mixing effect of the paddle dryer. There was a marked increase of drying rate with an increase of the DS/DSS in the experimental range of DS/DSS = 0-1/3.     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

Nitrogen mass balance in a constructed wetland treating piggery wastewater effluent

The nitrogen changes and the nitrogen mass balance in a free water surface flow constructed wetland （CW） using the four-year monitoring data from 2008 to 2012 were estimated. The CW was composed of six cells in series that include the first settling basin （Cell 1）, aeration pond （Cell 2）, deep marsh （Cell 3）, shallow marsh （Cell 4）, deep marsh （Cell 5） and final settling basin （Cell 6）. Analysis revealed that the NH4＋-N concentration decreased because of ammonification which was then followed by nitrification. The NO4＋-N and NO4＋-N were also further reduced by means of microbial activities and plant uptake during photosynthesis. The average nitrogen concentration at the influent was 37,819 kg/year and approximately 45% of that amount exited the CW in the effluent. The denitrification amounted to 34% of the net nitrogen input, whereas the accretion of sediment was only 7%. The biomass uptake of plants was able to retain only 1% of total nitrogen load. In order to improve the nutrient removal by plant uptake, plant coverage in four cells （i.e., Cells 1, 3, 4 and 5） could be increased.     

Beyond hypoxia：Occurrence and characteristics of black blooms due to the decomposition of the submerged plant Potamogeton crispus in a shallow lake

Organic matter-induced black blooms(hypoxia and an offensive odor) are a serious ecosystem disasters that have occurred in some large eutrophic shallow lakes in China. In this study, we investigated two separate black blooms that were induced by Potamogeton crispus in Lake Taihu, China. The main physical and chemical characteristics, including color- and odor-related substances, of the black blooms were analyzed. The black blooms were characterized by low dissolved oxygen concentration(close to 0 mg/L), low oxidation-reduction potential, and relatively low pH of overlying water. Notably higher Fe2+and∑S2-were found in the black-bloom waters than in waters not affected by black blooms. The black color of the water may be attributable to the high concentration of these elements, as black FeS was considered to be the main substance causing the black color of blooms in freshwater lakes. Volatile organic sulfur compounds, including dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, were very abundant in the black-bloom waters. The massive anoxic degradation of dead Potamogeton crispus plants released dimethyl sulfide, dimethyl disulfide, and dimethyl trisulfide, which were the main odor-causing compounds in the black blooms. The black blooms also induced an increase in ammonium nitrogen and soluble reactive phosphorus levels in the overlying waters. This extreme phenomenon not only heavily influenced the original lake ecosystem but also greatly changed the cycling of Fe, S, and nutrients in the water column.